User manual AEG-ELECTROLUX EWF127400W

[. . . ] Com CONTENTS Safety instructions Product description Control panel Washing programmes Consumption values Helpful hints and tips First use 2 4 5 7 11 12 13 Daily use 13 Care and cleaning 16 What to do if… 20 Technical data 22 Installation 22 Electrical connection 25 Environment concerns 25 Subject to change without notice. Read carefully & keep for future reference. € The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. [. . . ] There is a risk of water leakage or damage to the laundry. Measure out the detergent and the fabric softener 14 electrolux Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartor in the appropriate compartment ment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»). At the end of the programme the selector dial must be turned to position , to switch the machine off. If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme. sELECT THE TEMPERATURE BY PRESSING BUTTON 2 By selecting a programme , the appliance proposes automatically a default temperature. Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a different temperature. REDUCE THE SPIN SPEED BY PRESSING BUTTON 3 By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. SELECT THE AVAILABLE OPTION BY PRESSING BUTTONS 3, 4 AND 5 Depending on the selected programme, different functions can be combined before pressing the button 8. By selecting an option the relevant pilot light illuminates. If an incorrect option is selected, the integrated red pilot light of the button 8 flashes 3 times and the Err message appears on the display for few seconds. For compatibility among the washing programmes and the options see chapter «Washing Programmes». SELECT THE DELAY START BY PRESSING BUTTON 6 Before you start the programme, if you wish to delay the start, press the button 6 repeatedly, to select the desired delay. The selected delay time value (up to 20 hours) will appear on the display a few sec- If required, pour fabric softener into the compartment marked (the amount used must not exceed the «MAX» mark in the drawer). SELECT THE REQUIRED PROGRAMME BY TURNING THE PROGRAMME SELECTOR DIAL (1) Turn the programme selector dial to the required programme. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating the corresponding buttons. The green pilot light of the button 8 starts to flash. The selector dial can be turned either clockwise or counterclockwise. Turn to position to reset programme/Switching the machine off. [. . . ] This could be done by tying it to the tap with a piece of string or attaching it to the wall. This branch must be above the trap so that the bend is at least 60 cm above the ground. Electrolux 25 • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i. [. . . ]