User manual AEG-ELECTROLUX EWF128500W

[. . . ] Com CONTENTS Safety instructions Product description Control panel Washing programmes Consumption values Helpful hints and tips First use 2 4 4 8 11 12 14 Daily use 14 Care and cleaning 17 What to do if… 20 Technical data 22 Installation 23 Electrical connection 25 Environment concerns 26 Subject to change without notice. Read carefully & keep for future reference. €¢ The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. [. . . ] You can change these values by operating the corresponding buttons. The green pilot light of the button 8 starts to flash. The selector dial can be turned either clockwise or counterclockwise. Turn to position to reset programme/Switching the machine off. At the end of the programme the selector dial must be turned to position , to switch the machine off. The machine will not perform the new selected programme. sELECT THE TEMPERATURE BY PRESSING BUTTON 2 By selecting a programme , the appliance proposes automatically a default temperature. Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a different temperature. REDUCE THE SPIN SPEED BY PRESSING BUTTON 3 By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. SELECT THE AVAILABLE OPTIONS BY PRESSING BUTTONS 3, 4 AND 5 Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing button 8. When these buttons are pressed, the corresponding icons appear on the display. When they are pressed again, the icons disappear. If an incorrect option is selected, the integrated red pilot light of the button 8 flashes for 3 times and the Err message appears on the display for a few seconds. For the compatibility among the washing programmes and the options see chapter «Washing Programmes». SELECT THE DELAY START BY PRESSING BUTTON 6 Before you start the programme, if you wish to delay the start, press the button 6 repeatedly, to select the desired delay. 12 will appear on the display in the upper part of the display. The selected delay time value (up to 20 hours) will appear on the display a few seconds, then the duration of the programme will appear again. You must select this option after you have set the programme and before you press button 8. You can cancel or modify the delay time at any moment, before you press button 8. Select the programme and the required options. [. . . ] WATER DRAINAGE The end of the drain hose can be positioned in three ways. • In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. €¢ Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. [. . . ]