User manual AEG-ELECTROLUX EWP1472TDW

[. . . ] EWP 1072 TDW EWP 1472 TDW EWP 1672 TDW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN WASHING MACHINE USER MANUAL 2 www. electrolux. com CONTENTS 1. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. [. . . ] • Carefully close the detergent drawer. Detergent compartment for washing phase. 12 www. electrolux. com Compartment for liquid additives (fabric conditioner, starch). Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 3. 4. B • Position A for powder detergent (factory setting). When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the delay start. 9. 3 Setting a programme 1. Turn the programme knob and set the programme: – The indicator of the flashes. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the indicator flashes red. 2. 9. 4 Starting a programme without the delay start Press the : • The indicator of the stops to flash and stays on. • The programme starts, the door locks, the indicator is on ENGLISH 13 • The drain pump can operate for a short time when the appliance fills water. 9. 5 Starting a programme with the delay start • Press to set the delay you want to set. • Press : – The appliance starts the countdown. – When the countdown is completed, the programme starts automatically. You can cancel or change the set of the delay start before you press . Press to set the appliance to pause. 2. CAUTION!If the temperature and level of the water in the drum are too high, you cannot open the door. Open the appliance door when the delay start operates: 1. 4. Wait until the door lock indicator goes off. The delay start continues to operate. Open the appliance door when the programme operates: 1. 4. Press until the indicator of the set delay goes off. again to start the proPress gramme immediately. Turn the programme knob to to deactivate the appliance. Wait for some minutes and then open the appliance door. Set the programme again. 9. 6 Interrupting a programme and changing the options You can change only some options before they operate. The programme continues. 9. 9 At the end of the programme • The appliance stops automatically. [. . . ] Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. Make sure that the couplings of the water hoses are tight and there is not water leakages. 20 www. electrolux. com Problem Possible solution Make sure that the drain hose have no damages. [. . . ]