User manual AEG-ELECTROLUX EWS1266EDW

[. . . ] EWS 1266 EDW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN WASHING MACHINE USER MANUAL 2 www. electrolux. com CONTENTS 1. 22 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. [. . . ] Compartment for liquid additives (fabric conditioner, starch). Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 1 2 3. 4. B • Position A for powder detergent (factory setting). When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the delay start. 14 www. electrolux. com Bleach Alternatively the softener, it is also possible to use a bleach agent in the compartment with the programmes for white cottons. Proceed as follows: • Put the bleach in the compartment . Do not exceed the «MAX» mark in the detergent dispenser drawer. • Run a programme for white cottons. • At the end of the programme, run the programme RINSE. This helps to eliminate any bleach residues. Never pour bleach and softener into the compartment at the same time. 9. 3 Activating the appliance Press the On/Off button to activate or deactivate the appliance. A tune sounds when the appliance is activated. 9. 4 Setting a programme 1. After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the programme duration agree with the laundry load. • The display shows the new value. 2. Turn the programme knob and set the programme: – The related programme indicator comes on. – The display shows the level of the Time Manager, the programme duration and the indicators of the programme phases If necessary, change the temperature, the spin speed, the cycle duration, or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 9. 6 Starting a programme with delay start • Press again and again until the display shows the delay you want to set. The related indicator comes on the display. : • Press – The appliance starts the countdown. – When the countdown is completed, the programme starts automatically. You can cancel or change the set of the delay start before you press . 1. 2. 9. 5 Starting a programme without delay start Press : • The indicator stops to flash and stays on. [. . . ] Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub. The spin phase does not operate or the washing cycle lasts longer than usually. Set the spin programme. Make sure that the drain filter is not clogged. Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. [. . . ]