User manual AEG-ELECTROLUX EWT10120W

[. . . ] We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck ! 4 contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . 7 Personalisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The symbols which correspond to the different stages of the cycle are displayed ( Wash, Rinse, Drain, Spin). Before closing the lid of your appliance, ensure that the drum is properly closed : · When the two shutters are closed, · locking button A released. If you turn the programme selector to another programme while a cycle is in 10 how to run a wash cycle progress, the appliance will ignore the new selected programme. "Err" flashes and the "Start/Pause" pushbutton flashes red for a few seconds then the current cycle display reappears. Selecting the temperature Press the "Temperature" pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance. Selecting the spin speed Press the "Spin" pushbutton to change the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. You can also select "No spin"*, "Rinse hold"* or "Night silence plus" *. The maximum speeds are : for Cottons and Eco : 1300 rpm (EWT 13320W), 1200 (EWT 12320W), 1000 (EWT 10320W), for Jeans : 1100 rpm (EWT 13320W), 1200 (EWT 12320W), 1000 (EWT 10320W), for Handwash and Wool : 900 rpm (EWT 13320W, EWT 12320W), 1000 (EWT 10320W), for Synthetics, Easy iron, Lingerie and Sport : 900 rpm, for Delicates and Silk : 700 rpm. *depending on model At the end of the programme, if you have selected "Rinse and hold" or "Night silence plus" , you then need to select a "Spin" or "Drain" programme to finish the cycle. "Night silence plus" The washing machine does not empty the water after the final rinse which prevents the washing from creasing. Because there are no spin cycles, the washing programme is very quiet and can be selected at night. In Cotton and Synthetics programmes, the rinsing cycle uses more water. Selecting options You must select the different options after selecting the programme and before pressing the "Start/Pause" pushbutton (see "Programme table"). Interrupting a programme Adding washing When the "Add washing" light is on, you can add washing by proceeding as follows. Press the "Start/Pause" pushbutton : the corresponding light will flash green while the appliance is paused and the message "Pause" is displayed. The locking mechanism "snaps" twice to indicate that the lid is open. Press the "Start/Pause" pushbutton again to continue the programme. Modifying the programme in progress Before making any changes to the current programme, you need to pause the washing machine by pressing the "Start/ Pause" pushbutton. If the modification is not possible, "Err" flashes in the display and the "Start/Pause" pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below). Cancelling the programme If you want to cancel the programme, turn the programme selector to the "Stop" position . 2. 00 It is normal for the programme selector to remain stationary during the cycle. The symbol for the current cycle and the remaining time appear on the display. 2H If a delayed start has been selected, the countdown appears on the display (hour by hour, then 90, and minute by minute from 60 min). how to run a wash cycle 13 End of the programme The washing machine stops automatically ; the "Start/Pause" pushbutton goes out and "0" flashes on the display. The locking mechanism "snaps" twice to indicate that the lid is open. Turn the programme selector to the "Stop" position . [. . . ] **On some models, the audible signals can sound. *** After solving any problems, press the `Start/Pause' pushbutton to restart the interrupted programme. 22 technical specifications / installation Technical specifications DIMENSIONS Height Width Depth 850 mm 400 mm 600 mm 230 V / 50 Hz 2300 W Minimum Maximum 0, 05 MPa (0, 5 bar) 0, 8 MPa (8 bar) Type 20x27 LINE VOLTAGE / FREQUENCY POWER CONSUMPTION WATER PRESSURE Connection to water supply This appliance conforms to the CEE 89-336 directive concerning the limiting of radio-electric interference and the CEE 73-23 directive concerning electrical safety. Installation 3 4 Remove all protective packaging for transit before using for the first time. Keep in case needed for future transit : Transporting a non-secured appliance may damage internal components and cause leakages and malfunctions. The appliance can also be damaged through physical contact. [. . . ]