User manual AEG-ELECTROLUX EWT1276EOW

[. . . ] EWT 1276 EOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EN WASHING MACHINE USER MANUAL 2 www. electrolux. com CONTENTS 1. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. [. . . ] The marks MAX are the maximum levels for the quantity of detergent (powder or liquid). Compartment for liquid additives (fabric conditioner, starch). The mark M is the maximum level for the quantity liquid additives. Flap for powder or liquid detergent. ENGLISH 13 Liquid or powder detergent 1. 2. CLICK A 4. 3. CLICK B • Position A for powder detergent (factory setting). When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. 9. 3 Activating the appliance Press the On/Off button to activate or deactivate the appliance. A tune sounds when the appliance is activated. 2. If necessary, change the temperature, the spin speed, the cycle duration, or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 9. 4 Setting a programme 1. Turn the programme knob and set the programme: – The related programme indicator comes on. – The indicator of the – The display shows the level of the Time Manager, the programme duration and the indicators of the programme phases 9. 5 Starting a programme without delay start Press : • The indicator stays on. stops to flash and starts to flash on the 14 www. electrolux. com • The programme starts, the door is locked and the display shows the indicator . • The drain pump can operate for a short time when the appliance fills water. After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the programme duration agree with the laundry load. • The display shows the new value. 3. Press tinues. again. The programme con- 9. 8 Cancelling a programme 1. 2. Press the button for some seconds to cancel the programme and to deactivate the appliance. Press the same button again to activate the appliance. Now, you can set a new washing programme. The appliance does not drain the water. The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value. 9. 9 Opening the lid While a programme or the delay start operates, the appliance lid is locked and the display shows the indicator . If the temperature and level of the water in the drum are too high, you cannot open the lid. Open the appliance lid when the delay start operates: 1. [. . . ] Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. Make sure that the couplings of the water hoses are tight and there is not water leakages. Make sure that the drain hose have no damages. [. . . ]