User manual AEG-ELECTROLUX EWT1340

[. . . ] WASHING MACHINE INSTRUCTION BOOK EWT 1340 146 6135 00 - 05/04 GB CONTENTS FOR THE USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Precautions against frost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 8 This option can be selected only for synthetics lightly or normally soiled with a temperature of 40°C or higher. The washing time will be prolonged. 4. 7. Start the programme Press the Start/Pause button. The message corresponding to the phase that is running will appear in the display window. If you have selected a delayed start the washing machine will start its countdown. 4. 11. End of programme At the end of the programme the washing machine will stop automatically, an audible signal will sound (if you have not selected the "No sound" option) and the messages "cycle ended" / "Door openable" will appear alternately. If you have selected the "rinse hold" or "Silence cycle" options the Start/Pause button light is off. To drain or spin, turn the programme selector to the Drain, Spin or Delicate Spin programme. The "Door locked" message will appear in the display window. An electronic system moves the drum to the high position when the cycle has finished. This system enables you to load and unload the washing more easily. The lid can be opened when the locking device sounds a double click (if the machine is unbalanced which alters the operation, turn the drum by hand). Turn the programme selector to the "Stop" position to turn the washing machine off. Remove the plug and turn off the water supply. We recommend that you leave the lid and the drum open after use to air the interior. Note: after a long period the time on your washing machine will have to be reset. COTTON Washing 60°C 1000 Options 13. 45 16. 07 Change Exit 4. 8. How to change a programme during its cycle ? Before making any changes you must pause the washing machine by pressing the Start/Pause button. Any phase can be changed before the programme starts. When the programme has started you can only reset the washing machine by turning the programme selector to Stop position "O" and then selecting a new programme. To empty the water before starting a new washing cycle, you must cancel the programme and select the "Drain" cycle. Start the new programme by pressing the Start/Pause button. COTTON Door openable 60°C 1000 Options 16. 07 16. 07 Change Exit 4. 9. Cancelling a programme Turn the programme selector to the Stop position "O" to cancel the programme that is running. [. . . ] When you have put your washing machine into the required location, put the lever back into its initial position. Open the washing machine lid and remove the immobilization packing and plastic films. Leveling Precise leveling will prevent vibrations, noise and movements of the washing machine during operation. Make the washing machine level by adjusting the leveling screw that is too short. Unscrew the stand and locking collar assembly (lift the washing machine if necessary). Use a 10 mm spanner to remove the two screws and spacers at the back. When the washing machine is stable, maintain the stand on the ground and turn the locking collar as far as posible. [. . . ]