User manual AEG-ELECTROLUX EWT806TH

[. . . ] Washing Machine EN TH EWT806 and EWT959 2 contents electrolux water aid washing machine Congratulations Congratulations and thank you for choosing our washing machine. We are sure you will find your new washing machine a pleasure to use. Before you use the washing machine, we recommend that you read through the entire user manual, which provides the description of the washing machine and its functions. To avoid the risks that are always present when you use an electric appliance, it is important that the washing machine is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. [. . . ] Select this program for a full load of normally soiled cottons. Select this program for an average domestic load of mixed fabrics. Select this program for woollen clothes. Only wash woollens labelled `machine washable'. Select this program for lingerie, lace trimmed and embroidered items. * Intensive has a built-in 6 minute soak period at the start of the wash program. Any soak period you have selected will be added to the 6 minutes. (See information at "Soak option" on page 21) 18 operating your washing machine electrolux water aid washing machine Operating your washing machine Model: EWT806 tips and information Do not overfill the washing machine. When choosing a manual water level, use only the amount of water you need for the wash load. If you are unsure what level to choose, select auto sensing and the machine will automatically fill with water to the correct level for you. Auto sensing water level Selecting the auto sensing water level option ensures you will use just the right amount of water for the wash load. When you start your wash program, the machine will conduct a series of water fill and short agitations to determine the amount of water needed. will show in the digital display. Digital display shows followed by then program time is shown. eg. tips and information · You may be limited in your wash temperature choice by the wash program selection made. For example, you will not be able to select hot water when the wool program is selected. If you have a cold water connection only and the hot valve is capped off, you must select cold washes only, or the machine will sense the unavailability of hot for washes other than cold and shutdown. All rinse water temperatures are cold except for the wool wash program. Components in the washing machine are designed to be used with water no hotter than 70°C. You should have a temperature limiting valve fitted by a qualied plumber if your water supply is too hot. · · · sequence repeats until end of sensing will disappear and automatically normal wash agitation will commence when there is sufficient water in the bowl. If you add more clothes to the washbowl after an auto sensing water level wash program has started, the machine will auto sense the new load and add extra water if needed. For auto water level, the amount of water the machine determines for a load is an optimised level. You can adjust the auto level to be a small amount above or below the optimised level if you consider the amount of water you normally get using the auto option is too high or too low. To do this, see `Customising the auto sensing water level' on page 14. [. . . ] Select DRAIN&SPIN to drain water from bowl, then call Service. Select DRAIN&SPIN and press START/PAUSE to drain water from bowl, then power down, then call Service. If not, select DRAIN&SPIN to drain water from bowl. You may have to press Start/Pause to commence draining. If this problem is repeatedly experienced, call Service. Beeping continuously Water level sensor not operating correctly The machine will only permit draining. [. . . ]