User manual AEG-ELECTROLUX F40860

[. . . ] FAVORIT 40860 User manual Dishwasher 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. 24 Washing programmes Washing programmes Programme Degree of soil Type of load Programme description Consumption values1) Duration (minutes) Intermediate rinse Energy (kWh) 0, 9 1, 05 1, 5-1, 7 1, 2- 1, 6 100-120 30. MIN3) INTENSIV CARE 70° ECO 50°4) 30 Light soil Heavy soil Crockery and cutlery Crockery, cutlery, pots and pans Crockery and cutlery 2x 140-150 Normal soil 160 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 50° C and 65° C. 3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 4) Test programme for test institutes. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. Check that the baskets have been loaded correctly and that the spray arms are free to rotate . Check that the water tap is opened. 15 16-18 9 12 - 23 AUTOMATIC2) Mixed normal and heavy soil Crockery, cutlery, pots and pans 1/2x Water (litres) Main wash Prewash Final rinse Drying Select and start a washing programme 25 3. Press the On/Off button: all the programme lights illuminate (setting mode). Press the button corresponding to the required programme (see "Washing programmes" chart). When a programme has been selected the corresponding light will illuminate. Close the dishwasher's door, the programme starts automatically. Setting and starting the programme with "delay start" 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. You can choose from 1 to 19 hours of delay. Close the dishwasher's door, the countdown starts automatically. [. . . ] When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot. Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. [. . . ]