User manual AEG-ELECTROLUX F54861

[. . . ] And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel The digital display Function buttons Setting mode First use Setting the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 5 6 7 7 7 7 8 8 9 9 10 11 11 Activation/deactivation of the Multitab function 17 Washing programmes 18 Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Installation instructions 19 20 20 20 21 22 22 22 22 22 22 24 24 Loading cutlery and dishes 12 The lower basket 13 The cutlery basket 13 The upper basket 14 Adjusting the height of the upper basket 15 Use of detergent 15 Fill with detergent 16 Multitab function 17 Installation 24 Fitting under a counter (kitchen worktop or sink) 25 Levelling 25 Water connection 26 Water supply connections 26 Water inlet hose with safety valve 26 Water outlet hose connection 27 Electrical connection 28 Environment concerns 28 Packaging material 28 Subject to change without notice Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. 18 Washing programmes If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes Programme Degree of soil Type of load Programme description 1/2x Intermediate rinse Consumption values 1) 90 - 130 Duration (minutes) 1, 1 - 1, 7 Energy (kWh) 0, 9 1, 5 -1, 7 0, 1 1, 0 - 1, 1 AUTO 45°-70°2) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Light soil Heavy soil Crockery and cutlery Crockery, cutlery, pots and pans Crockery and cutlery Partial load (to be completed later in the day)5) 30 MIN 60°3) INTENSIV CARE 70° 30 12 150 - 160 Any 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C. Cancelling the "delay start" and / or a washing programme · To cancel a delay start in progress you have to reset the dishwasher. · Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Hot steam may escape when the door is opened. Interrupt a washing programme in progress: · Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. · Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted. End of the washing programme 20 Unloading the dishwasher · · · 1. [. . . ] Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. [. . . ]