User manual AEG-ELECTROLUX F55011IM

[. . . ] Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function" active. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing: the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated. To change the setting, press button B again until the end of programme indicator light turns off. If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 5) This programme does not require the use of detergent Press the On/Off button: all the programme lights illuminate and in the display 3 horizontal lines are visible (setting mode). Close the dishwasher's door, the programme starts automatically and in the digital display 1 horizontal line is visible and will remain on for all the duration of the programme. Setting and starting the programme with "delay start" 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. You can choose from 1 to 9 hours of delay. Close the dishwasher's door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate. [. . . ] The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. [. . . ]