User manual AEG-ELECTROLUX F55040W0

[. . . ] Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. Before the installation and use, read this manual carefully: · For your safety and the safety of your property. Always keep these instructions with the appliance also if you move or give it to a different person. [. . . ] Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. Press the lid until it locks into position. You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage). Some types of tablets can contain other agents. Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the products). The programme duration can increase if you use the multitab function. activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the function when a washing programme operates. Press and hold function buttons (D) and (E) at the same time until the multitab indicator comes on. When you activate the multitab function, it stays on until you deactivate it. Press and hold at the same time, function buttons (D) and (E) until the multitab indicator goes on. When the washing programme is completed, adjust the water softener to the water hardness in your area. [. . . ] Fill the rinse aid dispenser with rinse aid. You have set a washing programme without drying phase or with a decreased drying phase. ­ The indicator light for function button B continues to flash. ­ The display shows the new adjustment. [. . . ]