User manual AEG-ELECTROLUX F55080VI-M

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing: the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated. To change the setting, press button B again until the end of programme indicator light turns off. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multi-Tab function". Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Programme Degree of soil Type of load Programme description Consumption values 1) Duration (minutes) Intermediate rinse Energy (kWh) 1, 1 - 1, 5 0, 9 AUTOMATIC2) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans 30 MIN3) Light soil Crockery and cutlery 1/2x 90 - 115 30 9 12 - 23 Water (litres) Main wash Final rinse Prewash Drying Select and start a washing programme 23 Programme Degree of soil Type of load Programme description Consumption values 1) Duration (minutes) Intermediate rinse Energy (kWh) 1, 5 -1, 7 0, 8 -0, 9 1, 0 - 1, 2 140 - 150 150 - 160 60 - 70 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. Cancelling the "delay start" and / or a washing programme · To cancel a delay start in progress you have to reset the dishwasher. · Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Hot steam may escape when the door is opened. Interrupt a washing programme in progress: Unloading the dishwasher 25 · Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. · Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted. [. . . ] The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. 36 Electrical connection The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. [. . . ]