User manual AEG-ELECTROLUX F55402VI0P

[. . . ] FAVORIT 55402 VI DISHWASHER USER MANUAL 2 CONTENTS 4 6 7 8 9 10 13 16 17 19 SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES OPTIONS BEFORE FIRST USE DAILY USE CARE AND CLEANING TROUBLESHOOTING TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. [. . . ] Do not use detergent and do not load the baskets. If you use the combi detergent tablets, activate the multitab function. These tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. Refer to the instructions on the packaging of the products. Water hardness German degrees (°dH) 51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 <4 French degrees (°fH) 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 <7 mmol/l Clarke degrees 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 <5 ADJUSTING THE WATER SOFTENER Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. Refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. You must adjust the water softener manually and electronically. Water softener adjustment Manual Electronic 10 9 8 7 6 51) 4 3 2 12) 9. 1 - 12. 5 7. 6 - 9. 0 6. 5 - 7. 5 5. 1 - 6. 4 4. 0 - 5. 0 3. 3 - 3. 9 2. 6 - 3. 2 1. 9 - 2. 5 0. 7 - 1. 8 < 0. 7 2 1) 2 1) 21) 21) 21) 21) 1 1 1 12) 1) Factory position. 2) Do not use salt at this level. ENGLISH 11 Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to `SETTING AND STARTING A PROGRAMME'. Press and hold function buttons (B) and (C) at the same time until the indicators of function buttons (A), (B) and (C) flash. · The indicators of function buttons (B) and (C) go off. · The indicator of function button (A) continues to flash. Example: five intermittent acoustic signals = level 5. · The display shows the setting of the water softener. · Make sure that cutlery and dishes do not bond together. · Make sure that glasses do not touch other glasses. · Put small items in the cutlery basket. [. . . ] The salt container is empty. The set level of the water softener is incorrect. The cap of the salt container is loose. Whitish streaks and stains or bluish layers on glasses and dishes. The released quantity of rinse aid is too much. ENGLISH 19 Problem Possible cause The quantity of detergent was too much. Possible solution Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Increase the released quantity of rinse aid. Dry water drop stains on glasses and dishes. The released quantity of rinse aid was not sufficient . The quality of the detergent Try a different brand of decan be the cause. [. . . ]