User manual AEG-ELECTROLUX F65011IM

[. . . ] And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode Audible signals First use Set the water softener Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 6 6 7 7 8 8 9 10 10 Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Hints for test institutes Installation instructions Installation Water connection Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Installing and fitting the hinged door Fitting the hinged door Environment concerns Packaging material 19 20 21 21 21 23 23 24 24 24 24 24 26 26 28 28 28 28 28 29 30 30 31 35 35 Load cutlery and dishes 11 The lower basket 12 The cutlery basket 12 The upper basket 14 Adjusting the height of the upper basket 15 Use of detergent 16 Fill with detergent 17 Multi-tab function 18 Activation/deactivation of the Multitab function 18 Subject to change without notice Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. Washing programmes 19 If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes Programme Degree of soil Type of load Programme description 1/2x Intermediate rinse Consumption values1) 30 85 - 105 Duration (minutes) 0, 9 1, 1 - 1, 5 Energy (kWh) 1, 9 - 2, 1 0, 1 1, 0 - 1, 1 AUTOMATIC 2) Mixed nor- Crockery, mal and cutlery, pots heavy soil and pans 30 MIN 3) INTESIVE CARE 70° ECO 50° 4) Light soil Heavy soil Crockery and cutlery Crockery, cutlery, pots and pans 2x 7 165 - 175 116 - 126 PREWASH Any Partial load (to be completed later in the day)5) 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. · If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. End of the washing programme · The appliance automatically stops and an audible signal informs you of the end of the washing programme. The indicator light of the programme just ended remains illuminated. Switch off the appliance. Unloading the dishwasher 21 3. Leave the appliance door ajar for a few minutes before removing the dishes. This way they will be cooler and the drying will be improved. Standby mode If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. The standby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar. Press one of the buttons (not the on/off button), to go back to end-of-programme mode. Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. [. . . ] Align bars at the top so that the upper hole lies over the pre-mounted aligning disk. With a width of 568 mm first fix the additionally supplied aligning disks B on the already pre-mounted aligning disks. Stand the machine in front of the kitchen unit into which it is to be installed. Place cable and hoses into the neighbouring unit. [. . . ]