User manual AEG-ELECTROLUX F65042M0P

[. . . ] Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Do not use detergent and do not load the baskets. Press Program again and again to change the setting. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Make sure that the release button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). Set and start the correct programme for the type of load and the degree of soil. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use detergent tablets, put the tablet in the compartment (A). Make sure that the release button locks into position. The display shows the programme duration that decreases with steps of 1 minute. The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: · If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode. Starting a programme without delay start Press Program again and again until the indicator of the programme that you want to set comes on. Starting a programme with delay start Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). [. . . ] Assemble the filter (A) and put it into position in filter (B). If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. Clean the appliance with a moist soft cloth. The appliance does not start or it stops during operation. [. . . ]