User manual AEG-ELECTROLUX F65411VI

[. . . ] FAVORIT 65411 VI User manual Dishwasher 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] The digital display indicates the current setting: = Rinse aid dispenser deactivated. = Rinse aid dispenser activated. Washing programmes 23 4. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multi-Tab function". Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes Programme Degree of soil Type of load Programme description Consumption values 1) Duration (minutes) Intermediate rinse Energy (kWh) 0, 8- 1, 4 0, 8 0, 8-0, 9 1, 7-1, 9 116-126 AUTOMATIC 2) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans 30 MIN3) ECO 50°4) Light soil Crockery and cutlery 85-110 30 160-170 12-13 Normal soil Crockery and cutlery 8 11 - 21 1/2x 19-21 INTENSIV CARE 70° 2x Heavy soil Crockery, cutlery, pots and pans Water (litres) Main wash Final rinse Prewash Drying 24 Select and start a washing programme Programme Degree of soil Type of load Programme description Consumption values 1) Duration (minutes) Intermediate rinse Energy (kWh) 0, 6-0, 7 65-75 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 50° C and 65° C. 3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 4) Test programme for test institutes. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Press the button corresponding to the required programme (see "Washing programmes" chart). Close the dishwasher door, the programme starts automatically. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. [. . . ] The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. Electrical connection 37 The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. [. . . ]