User manual AEG-ELECTROLUX F88012VIL

[. . . ] And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode Audible signals First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 7 7 7 8 8 9 9 10 11 11 Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Hints for test institutes Installation instructions Installation Fixing to the adjacent units Levelling Water connection Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Environment concerns Packaging material 18 19 21 21 21 22 22 22 23 23 23 23 25 25 26 26 26 27 27 27 27 28 29 29 29 Load cutlery and dishes 11 The lower basket 12 The cutlery basket 13 The upper basket 14 Adjusting the height of the upper basket 14 Use of detergent 15 Fill with detergent 15 Multitab function 16 Activation/deactivation of the Multitab function 17 Subject to change without notice Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Press the Multitab button: the corresponding indicator light illuminates. To deactivate the function press the Multitab button again: the indicator light turns off. If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active. Activation/deactivation of the rinse aid dispenser 1. Press simultaneously buttons B and C , until the lights of buttons A , B , and C start flashing. Press button B , the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. Once the delay start has elapsed the programme will start automatically. Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Hot steam may escape when the door is opened. Open the door carefully. Cancelling a delay start or a washing programme in progress · Simultaneously press and hold the two programme buttons positioned over the word RESET, until 2 horizontal lines will appear in the digital display. · Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. · If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Interrupt a washing programme in progress · Open the appliance door, the programme will stop. Close the door, the programme will start from the point at which it was interrupted. End of the washing programme · The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. [. . . ] The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. [. . . ]