User manual AEG-ELECTROLUX F88080IM

[. . . ] FAVORIT 88080 i User manual Dishwasher 2 Dear Customer Thank you for choosing one of our high quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence. In addition to this you find environmental and energy saving aspects as an inte gral part of our products. [. . . ] The name of the selected dishwashing cycle will flash. To the right of the name the estimated length of the programme is displayed. The selected dishwashing cycle will start. In the text line in the display you can see the name of the current stage in the programme. Next to this you can see the estimated time remaining in minutes. Using the OPTION button you can briefly display the name of the dishwashing cycle in the display. A dishwashing cycle can only be started from the Programmes menu. During the dishwashing cycle, the remaining time shown in the display may be adjusted according to the size of the load, degree of soiling, etc. If the dishwashing cycle does not start: If after pressing the OK/START button the cycle does not start and a message ap pears in the display, (REFILL RINSE AID, REFILL SALT or PLEASE CLOSE DOOR): Follow the instructions in the message. After the problem has been remedied, the cycle starts automatically. With the messages REFILL RINSE AID or REFILL SALT you can nevertheless start the cycle by pressing the OK/START button again. While a dishwashing cycle is running, you cannot make changes to options or settings. 5. 3 3 3 3 In daily use 33 Interrupting or aborting a dishwashing cycle 1 Only interrupt a dishwashing cycle that is in progress if it is absolutely necessary. Interrupting the dishwashing programme by opening the dishwasher door Hot steam may escape when the door is opened. The dishwashing cycle will stop, in the display: PLEASE CLOSE DOOR 2. If you want to start a new dishwashing cycle, check whether there is any deter gent in the dispenser. Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dishwasher back on again. 3 3 Setting the delay start With the delay start you can delay the start of a dishwashing cycle for between 1 and 19 hours. First of all set the delay start and then the desired dish washing cycle. Go to the DELAY START option; see section "Adapting an option/setting". Set the period by which you wish to delay the start in hours. Press the OPTION button, to change to the Programmes menu. [. . . ] In the event of legally admitted liability, compensation will not exceed the purchase price paid for the appliance. These guarantee terms are only valid for appliances purchased and used in Belgium. For export ed appliances, the user must first make sure that they satisfy the technical conditions (e. g. : volt age, frequency, installation instructions, type of gas, etc. ) for the country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium. [. . . ]