User manual AEG-ELECTROLUX F88421VI

[. . . ] FAVORIT 88421 VI User manual Dishwasher 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multitab function". Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. 18 Washing programmes Washing programmes Programme Degree of soil Type of load Programme description Intermediate rinse Consumption values 1) 80 - 125 199 - 220 Duration (minutes) 1, 0 - 1, 1 Energy (kWh) 1, 3 - 1, 5 0, 8 0, 8 - 0, 9 0, 6 - 0, 7 0, 8 - 0, 9 0, 1 0, 8 - 1, 3 1 NIGHT CYCLE 2 AUTO 45-70°2) 3 INTENSIV CARE 70° 4 30 MIN 60°3) 5 ECO 50°4) 6 1 HOUR 55° 7 Normal soil Crockery and cutlery Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Heavy soil Crockery, cutlery, pots and pans Crockery and cutlery Crockery and cutlery Crockery and cutlery Delicate crockery and glassware Partial load (to be completed later in the day)5) 130 - 140 30 Light soil Normal soil Normal soil Normal soil 45 - 55 160 - 170 65 - 75 12 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C. 3, 5 8 Any 11 - 12 10 - 11 12 - 13 8 14 - 15 10 - 19 1/2x 12 - 13 Water (litres) Main wash Final rinse Prewash Drying Select and start a washing programme 19 3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 5) This programme does not require the use of detergent Option available with washing programme Programme 1 NIGHT CYCLE 2 AUTO 45-70° 3 INTENSIV CARE 70° 4 30 MIN 60° 5 ECO 50° 6 1 HOUR 55° 7 GLASS 45° 8 RINSE AND HOLD Half load Yes No Yes No Yes No No No Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Press one of the programme selection buttons until the number corresponding to the required programme shows in the digital display (see "Washing programmes" chart). The lights of the programme selection buttons and programme number are flashing. If you want to set the NIGHT CYCLE programme, press the NIGHT CYCLE button, the corresponding indicator light comes on. If you want to set option please refer to the "Washing programmes" chart to be sure that the option is available with the selected programme. [. . . ] Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot. Electrical connection Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. [. . . ]