User manual AEG-ELECTROLUX FAV 4020 W

[. . . ] ÖKO_FAVORIT 4020 Dishwasher Operating instructions Dear customer! Before you operate your dishwasher, please read through these operating instructions carefully. They contain important information for your safety as well as operation and maintenance of your machine. For this small trouble, your dishwasher will reward you with faultless performance. Should your dishwasher ever have a fault, please look it up in the section on "If you think your dishwasher is not working properly". [. . . ] The spoon strip on the LH side of the cutlery basket should be used for coffee spoons and teaspoons. To unload, you can take the cutlery basket out of the lower basket. Fig. 16 BK 4 24 BK-2(1) GB/EU Upper basket Smaller, more fragile dishes are given a gentle wash in the upper basket. Draw out the upper basket to its fullest extent. Arrange small crockery items, such as saucers, cups, glasses, and fragile plastic parts, in the upper basket. Fig. 17 OK 1 (3) Arrange items inserted on and under the hinged cup holders in staggered formation to ensure a thorough cleaning action on all sides. To insert tall items, the hinged cup holders can be folded up. You can incline or suspend wine, champagne, and brandy glasses in the recesses of the hinged cup holders. Both rows of glass-holding prongs on the left are also suitable for inclination of glasses, beakers, etc. GB/EU Fig. 18 OK 3 (1) OK* After loading, re-insert the upper basket to its fullest extent. 25 Switching on/off Setting the dishwashing programme Check that the crockery and cutlery in your dishwasher are arranged so that the spray arm is not obstructed. Fully turn on the water tap, if it is off. If a washing programme has been started despite the water tap being turned off, switch off your machine, turn on the water tap, and reset the washing programme. Setting the dishwashing programme Turn the programme switch clockwise to position A or B as shown in the programme chart. Turn the programme selector to the programme you require (see "Programme chart"). During the programme cycle, the programme cycle indicator cycles forward, indicating the status of the machine washing programme in each step. During heating in the washing and rinse aid cycles, the programme switch remains stationary until the necessary temperature is attained. Programme correction You can correct any washing programme you have inadvertently set wrongly by switching off your machine with the programme selector ( position). For reasons of radio interference suppression, you should operate the programme switch only when your machine is switched off. Automatic detergent addition could also be tripped. Hot steam may emerge when the door is opened. Reset the washing programme you require. Hot steam may emerge when the door is opened. [. . . ] Any residual water in the appliance is automatically pumped away. The pump also operates even if the machine is switched off and should not be disconnected from the electricity supply. A fault is recognised by the fact that a pump noise can be heard when the machine is switched off. If a fault occurs, first turn off the water tap. [. . . ]