User manual AEG-ELECTROLUX FAV 5040 I M

[. . . ] It is imperative that these instructions are observed. This symbol or numbered instruction steps lead you step by step through the operation of the appliance. Next to this symbol you receive additional information and practical tips on using the appliance. Tips and instructions for the economical and environmentally conscious use of the appliance are marked with a clover leaf. [. . . ] During the wash programme the current programme step is indicated on the programme progress display. 3 If END or DRYING on the programme progress display flash after the start of the programme, please read the "What to do, if. . . " section. Changing/Interrupting/Cancelling the Wash Programme 3 Only change or interrupt a wash programme in progress if it is absolutely necessary to do so. Changing the wash programme If you want to change the wash programme within 6 seconds of making a programme selection, briefly press the button for the new wash program. If you want to change the wash programme at a later point in time, use the following procedure: 0 1. Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash. After a few seconds only the indicator for the new programme flashes. Release the programme button, the new programme is now running. 3 23 Operating instructions Interrupting the wash programme by opening the door of the dishwasher Hot steam may escape from the appliance when opening the door. The indicator for the programme that is currently running extinguishes. The wash programme continues. 1 Cancelling the wash programme 0 1. Press the button for the current wash programme and hold it pressed. The programme indicator for the current wash programme flashes for a few seconds and then extinguishes. Place the coarse/fine filter in the microfilter and press together. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. 1 The dishwasher must not be used without filters under any circumstances. 27 Operating instructions What to do, if . . . Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee. . . . Error messages · If the END or DRYING indicator on the programme progress display is flashing, you can probably rectify the fault yourself. After rectifying an END or DRYING fault, press the button for the wash programme that has been started. If the fault is displayed again, contact AEG Service Force. · If indicators for other programme steps on the programme progress display are flashing, please contact AEG Service Force and state the fault indicated. Symptom Possible Cause Tap is closed. END on the programme progress display is flashing: no water is running into the dishwasher. The filter (where present) in the threaded hose fitting is blocked. The water inlet hose is not correctly laid. The water drain hose is not correctly laid. [. . . ] The purchaser´s statutory rights are not affected by this guarantee. European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: ­ The guarantee starts from the date you first purchased your product. ­ The guarantee is for the same period and to the same extent for labour and parts as exist in the new country of use for this brand or range of products. ­ This guarantee relates to you and connot be transferred to another user. [. . . ]