User manual AEG-ELECTROLUX FAV4041-WGB

[. . . ] It is imperative that these instructions are observed. This symbol or numbered instruction steps lead you step for step through the operation of the appliance. Next to this symbol you receive additional information and practical tips on using the appliance. Tips and instructions for the economical and environmentally conscious use of the appliance are marked with a clover leaf. [. . . ] If the lid is closed: press release button (1). Fill the detergent dispenser with detergent. The markings indicate the dosing levels: "20" corresponds to approx. 20 ml of detergent, "30" corresponds to approx. Close the lid and press until it locks into place. 3 If the dishes are very heavily soiled put additional detergent into the adjacent chamber (2). This detergent will take effect during the pre wash. 22 Operating Instructions Use of "3 in 1"/ Combi Detergent Tablets General Advice These products are tablets with combined detergent/rinse-aid and salt functions. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers instructions (on the product packaging). These products should be strictly used according to the detergent manufacturers instructions. 1 Do not place the tablets in the tub or the cutlery basket as this will result in poorer wash results. The tablets should be placed in the detergent doser. If you encounter problems when using "3 in1" products for the first time then please contact the detergent manufacturers care line (the telephone number is given on the product packaging). Special Advice When using combination products, the rinse-aid and salt lights are no longer useful. After the appliance has been closed again, the air that has entered will be heated significantly and expand. As a result, water may collect in the base of the appliance and trigger the antiflood system. Changing a wash programme If you would like to change the wash programme in the first 3 seconds after having selected a programme, briefly press the button for the new wash programme. If you would like to change the wash programme after this time, proceed as follows: 0 1. Press the button for the new wash programme and hold it down. First, the indicator for the wash programme that is currently running will flash. After several seconds only the indicator for the new wash programme will be illuminated. The newly selected wash programme will begin. 3 26 Operating Instructions Interrupting the wash programme by opening the dishwasher door Hot steam may escape when the door is opened. The wash programme will continue. 1 Cancelling the wash programme 0 1. Press function buttons 2 and 3 and keep them pressed. The programme display for the current wash programme will flash for several seconds and then go out. [. . . ] The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to respect the assembly instructions or directions for use. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non-original accessories or spare parts are not covered by the guarantee. Appliances that are easy to transport may be delivered or sent to the consumer services department. [. . . ]