User manual AEG-ELECTROLUX FAV40660I-B

[. . . ] ÖKO_FAVORIT 40660 i Dishwasher User Instructions Dear customer, Please read these user instructions carefully. Above all please observe the safety instructions on the first few pages ofthese user instructions!Please keep these user instructions for later reference. Pass them on to any subsequent owner of the appliance. 1 0 The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance. [. . . ] After the appliance has been closed again the air that has entered will be greatly heated and expand. As a result water may penetrate the base of the appliance and trigger the anti-flood system. Interrupting the wash programme by opening the door of the dishwasher Hot steam can escape from the appliance when the door is opened. Lights are flashing in the multidisplay. The wash programme will continue. 1 Ending the wash programme 0 1. Press the button for the wash programme that is running and hold it down until the programme indicator for the wash programme goes out. Release the programme button; the wash programme has been ended. 25 Operating Instructions Pause function 3 The pause function can only be initiated before the drying section of the programme I. If the pause function is initiated during the drying section of the programme I the wash programme is ended. Using the pause function the dishwasher can be temporarily stopped: 0 1. After a short time when the wash programme is to continue, press the ON/OFF button again. The wash programme will continue. 2 The wash programme should not be stopped for a prolonged period or the cooled water will need to be reheated resulting in increased energy consumption. Setting or changing the delay start timer Using the delay start timer you can opt to set the wash programme to start in 3, 6 or 9 hours. Setting the delay start timer: Press the button b until the indicator next to the number of hours of delay illuminates. Changing the delay start timer: As long as the wash programme has not started, you can still change the delay start set by pressing the button b. Repeatedly press the button b until all three of the time indicators are off. The selected wash programme will begin immediately. Press the button for the required wash programme. After the set number of hours the wash programme will begin. 26 Operating Instructions Switching Off the Dishwasher Only switch off the dishwasher when L is illuminated on the programme progress display. The ON/OFF button M indicator extinguishes. 1 Hot steam may escape from the appliance when opening the door immediately after the end of the programme. Open the door carefully. Emptying the Dishwasher 3 · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing them from the appliance. · Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and can cool down. [. . . ] In the event of legally admitted liability, compensation will not exceed the purchase price paid for the appliance. These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user must first make sure that they satisfy the technical conditions (e. g. : voltage, frequency, installation instructions, type of gas, etc. ) for the country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium. [. . . ]