User manual AEG-ELECTROLUX FAV7080IW

[. . . ] With this dishwashing system the motor speed and spray pressure are varied during the dishwashing cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle. 2 Contents Operating Instructions. 4 4 5 5 Prior to using for the first time . Selecting the dishwashing cycle (Cycle Table) . [. . . ] Press the Delay Timer button repeatedly until the indicator next to the number of hours for which the start of the dishwashing cycle is to be delayed lights up, e. 6h, if the cycle is to start in 6 hours. The LED indicator for the programme selected and the indicator next to the number of hours will light up. The dishwashing cycle will start automatically following a countdown of the hours set. To change the time delay: As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button. Cancelling the delay timer: Press the DELAY TIMER button repeatedly until none of the three time displays is lit. The selected dishwashing cycle will begin immediately. To change a dishwashing cycle As long as the cycle has not yet started, you can still change the dishwashing cycle. First abort the dishwashing cycle, then re-set the time delay, lastly select the new dishwashing cycle. Switching off the dishwasher Do not switch off the dishwasher until the indicator for the end of the dishwasher cycle is illuminated in the cycle progress display. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result. 1 Removing the dishes 3 It is normal for the inner door and the dispensers to be damp. the selected dishwashing cycle is flashing, the indicator for the end of Water drain hose has not the dishwashing cycle is been correctly positioned. flashing in rhythm 2 short light signals one after another. the indicator for the end of the dishwashing cycle is The anti-flood system has flashing in rhythm 3 short been triggered. The mains plug is not plugged in. Check hose installation. Turn off the tap and contact the Customer Care department. Plug in mains plug. The cycle is not starting. A fuse in the house's wiring Replace fuse. For dishwasher models with If the dishes are to be a delay start timer: washed immediately, A start time has been selectcancel the delay start. ed. 22 Malfunction Possible cause The dishwashing compartment is made from rust-free stainless steel. Rust spots in the dishwashing compartment are due to rust particles from external sources (rust particles from water pipes, pans, cutlery, etc. ). Remove such spots with a commercially-available stainless steel cleaning product. The whistling is not a cause for concern. Remedy Rust spots are visible in the dishwashing compartment. Only wash cutlery, dishes and pans that are suitable for dishwasher use. A whistling noise can be heard when washing dishes. Use a different brand of detergent. If the dishwashing results are not satisfactory The dishes are still dirty. · The wrong dishwashing cycle was selected. · The dishes were loaded is such a way that the dishwashing water did not reach all items. [. . . ] Hongkong Tel. : 2494 4000 Israel Electricity & Electronic Services-Evis LTD. Raanana, Industrial area 43654 Tel: 972-9-7448118 Fax: 972-9-7603618 e-mail:evis@evis. co. il Korea (South) Core Incorp. 200 Nonhyun-Dong Kangnam-Ku Seoul Telefon 82 2 549 89 61 Croatia Electrolux D. O. O. Suplova 7 10000 Zagreb Tel. : 1 61 19512 Fax: 1 61 19513 Kuwait/Arabian Gulf Ali Al-Ghanim Est. [. . . ]