User manual AEG-ELECTROLUX FAVORIT 40250I-D

[. . . ] and please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Delay start button Digital display Function buttons Setting mode Use of the appliance Setting the water softener Electronic adjustment Use of dishwasher salt Use of rinse aid 24 24 24 24 24 25 25 26 27 27 27 27 28 28 28 29 30 Washing programmes Setting and starting a washing programme 33 34 Cancelling a washing programme 35 Interrupting a washing programme 35 Setting and starting a washing programme with delay start 35 End of the washing programme 36 Standby mode 36 Care and cleaning 36 Clean the filters 36 Clean the spray arm 36 External cleaning 37 Frost precautions 37 What to do if. Loading cutlery and dishes 31 Helpful hints and tips 31 Primary basket 31 Cutlery basket 31 Use of detergent 32 Fill with detergent 32 Use of detergent tablets 32 Do these steps when the drying results are not satisfactory: 33 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. [. . . ] Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing programme to prevent corrosion. Do these steps to fill the salt container: 1. Fill the salt container with 1 litre of water (only the first operation). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. It is normal that water overflows from the salt container when you fill it with salt. Use of rinse aid When you set the water softener to level 1, the salt indicator light does not stay on. Do not fill the rinse aid dispenser with other products (e. Rinse aid gives spot and streak free dry. Only use detergents (powder, liquid or tablet) that are applicable for dishwashers. The instructions on the packaging usually refer to large dishwashers (12 settings). Do not use more than the correct quantity of detergent to save an environment. Do these steps to fill the detergent dispenser: 1. Fill the detergent dispenser (A) with detergent. If you use a washing programme with prewash phase, put more detergent in the prewash detergent compartment (B). Do these steps to use detergent tablets: Make sure that the detergent tablets are applicable for your water hardness. It is not necessary to fill the salt container and the rinse aid dispenser. Do these steps when the drying results are not satisfactory: 1. Fill the rinse aid dispenser with rinse aid. Do these steps to use the detergent powder again: 1. [. . . ] Flat filter Do these steps to clean the filters: 1. Remove food particles from the holes in the spray arm. If necessary, do these steps to disassemble : 1. Clean the external surfaces of the appliance and control panel with a damp soft cloth. [. . . ]