User manual AEG-ELECTROLUX FAVORIT 5050 BIO W

[. . . ] Technical data Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice 4 Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your safety and the safety of your property. · For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. [. . . ] Press function button (C), the end indicator comes on and the acoustic signals are active. USE OF THE APPLIANCE 1. Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). SETTING THE WATER SOFTENER The water softener removes minerals and salts from the water supply. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Water hardness German degrees (°dH) 51 - 70 French degrees (TH°) 91 - 125 mmol/l Clarke degrees 64 - 88 Water hardness adjustment manually electronically 10 9, 1 - 12, 5 2 1) Setting the water softener 11 Water hardness German degrees (°dH) 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 <4 1) Factory position. To deactivate the multitab function and use separately detergent, salt and rinse aid: 1. Fill the salt container and rinse aid dispenser. Adjust the water hardness setting to the highest level. Adjust the water softener to the water hardness in your area. Adjust the rinse aid dosage. LOADING CUTLERY AND DISHES Hints and tips · · · · · · · · · · · · Do not put in the appliance items that can absorb water (sponges, household cloths). Remove the remaining food from the items. Make soft the remaining burned food on the items. Put hollow items (cups, glasses and pans) with the opening down. Make sure that water does not collect in containers or in bowls. Make sure that cutlery and dishes do not bond together. Make sure that the glasses do not touch other glasses. [. . . ] The salt container cap is not closed correctly. There are streaks, whitish stains, or a bluish layer on glasses and dishes. Dry water drop stains on glasses and dishes. The washing programme was without a drying phase or with a decreased drying phase. [. . . ]