User manual AEG-ELECTROLUX FAVORIT 545I B

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Simultaneously press and hold the two Multitab buttons (D and E), until the "Multitab function" indicator light illuminates. To deactivate the function press the same buttons again until the "Multitab function" indicator light turns off. If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active. Activation/deactivation of the rinse aid dispenser 1. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. Washing programmes 23 = Rinse aid dispenser activated. 4. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. The number in the display is no longer flashing but fixed with static light. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. Once the delay start has elapsed the programme will start automatically. With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. Cancelling the "delay start" and / or a washing programme · To cancel a delay start in progress you have to reset the dishwasher. · Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. [. . . ]