User manual AEG-ELECTROLUX FM6000LD-A

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off. 10 Operating the appliance Setting the temperature To increase To decrease To switch off Control panel Touch Touch Touch and Display 50 to 220 220 to 50 0 the same time 3 If a temperature is selected, the indicator flashes until the desired temperature is reached. When the selected temperature is reached, a signal sounds. The indicator stops flashing and displays the selected temperature Operating the appliance 11 Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Control panel Display/Signal 1. Touch for 4 seconds Appliance switches off. Child safety device is switched on after 4 seconds. Step Switching off the child safety device Control panel Display/Signal 1. Touch for 4 seconds 0 lights up Appliance switches off. Child safety device is switched off after 4 seconds. Step Overriding the child safety device The child safety device can be released in this way for a single cooking session; it remains activated afterwards. Touch and at the same time / acoustic signal Until the appliance is next switched off, it can used as normal. Step 12 Operating the appliance Using the timer Two functions are possible: Function Safety cut-out Outcome after time has elapsed When a heat setting is set Acoustic signal 0 lights up Cooking zone switches off When cooking zone is not Acoustic signal 0 lights up used Pre-condition Countdown timer 3 If a heat setting is set in addition to a countdown timer that is set, the countdown timer becomes a safety cut-out. Stains which might have been caused by protein or acids in the food can be removed when the appliance is cold using a little lemon juice and a clean cloth. Then clean thoroughly using damp cloths. If the cooking surface has already cooled down before cleaning, heat up to about 80 C and switch off again. 3 Cleaning the cooking surface between two courses of a meal As in points 23 above Cleaning the control panel 1. Wipe the appliance with a damp cloth and a little washing-up liquid. Dry the appliance using a clean cloth. Removable Frontline strip The aluminium Frontline strip fastens on by means of magnets. It is easy to remove by hand and can be cleaned with detergent. Please do not use any scouring agents or sponges that scratch. Do not clean the strip in the dishwasher. What to do if . . . 19 What to do if . . . Problem The Teppan Yaki cannot be switched on or is not operating Possible cause Remedy More than 10 seconds have Switch the appliance on again. passed since the appliance was switched on The child safety device is switched on Several sensor fields were touched at the same time Automatic switch-off has been triggered Deactivate child safety device (See the section "Child safety device") Only touch one sensor field Remove any objects (pan, cloths, etc. ) that are lying on the control panel. Switch appliance on again The residual heat indicator is not displaying anything. The cooking zone was only on If the cooking zone is supfor a short time and is thereposed to be hot, call the Cusfore not yet hot tomer Service Department. Electronics fault Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house's wiring system) If after switching on again, is displayed again, call the customer service department and number are displayed 1 3 If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. [. . . ] Replace Frontline strips. Installing more than one Frontline hob 29 Overview of all appliance widths 180 mm Worktop-mounted cooker hood 360 mm Glass ceramic cooking surface with 2 radiation cooking zones Glass ceramic cooking surface with 2 induction cooking zones Gas hob with 2 burners Grill Grill/Deep fat fryer Wok Induction Teppanyaki 580 mm Glass ceramic cooking surface with 4 radiation cooking zones Gas hob with 4 burners Induction Teppanyaki 720 mm Glass ceramic cooking surface with 4 radiation cooking zones Glass ceramic cooking surface with 4 induction cooking zones Gas hob with 4 burners 30 Rating Plate AEG - ELECTROLUX 5, 6 kW 220-240 V Induction 5, 6 kW 941 177 678 50/60 59TPA23KO FM6800TYAN Guarantee/Customer Service 31 Guarantee/Customer Service Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's instructions. The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. Electrolux Service Force Centre must undertake all service work under this guarantee Any appliance or defective part replaced shall become the Company's property. [. . . ]