User manual AEG-ELECTROLUX FM7531K-AN

[. . . ] FM 7531 K-AN User manual Ceramic glass hob 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products. [. . . ] Wipe the appliance with a damp cloth and a little washing up liquid. Rub the appliance dry using a clean cloth. Remove Type of dirt sugar, food containing sugar plastics, tin foil limescale and water rings fat splashes shiny metallic discolouration immediately yes yes ------when the appliance has cooled down ----yes yes yes cleaner for glass ceramic or stainless steel* using a scraper* *Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops 3 3 Remove stubborn residues with a cleaner for glass ceramic or stainless steel. Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance. Removable Frontline strip The aluminium Frontline strip fastens on by means of magnets. It is easy to remove by hand and can be cleaned with detergent. Please do not use any scouring agents or sponges that scratch. Do not clean the strip in the dishwasher. 24 What to do if . . . What to do if . . . Problem Possible cause Remedy The cooking zones will not More than 10 seconds have Switch the appliance on again. switch on or are not function- passed since the appliance was ing switched on The child safety device is switched on l Several sensor fields were touched at the same time The sensor fields are partly covered by a damp cloth or with liquid Deactivate the child safety device (See the section "Child safety device") Only touch one sensor field Remove the cloth or the liquid. Switch the appliance on again. Automatic switch off has been Switch the appliance on again triggered STOP+GO is activated u too small or too big a ring is switched on The size of the bottom of the pan comes between the two rings The material of the bottom of the pan is not clearly recognised by the sensors The residual heat indicator is not displaying anything Switching off STOP+GO Use suitable cookware, switch off pan recognition Switch off pan recognition The cooking zone was only on If the cooking zone is supfor a short time and is there- posed to be hot, call the Cusfore not hot tomer Service Department. The highest heat setting has the same power as the automatic warm-up function Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house's wiring system) If after switching on again, e is displayed again, call the customer service department Use suitable cookware, switch off pan recognition Call Customer Care Department The automatic warm-up func- The highest heat setting is set tion is not switching on e and number are displayed Electronics fault f lights up Unsuitable cookware Pan recognition is defective If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department. What to do if . . . 25 1 3 Warning!Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. 26 Disposal Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e. g. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. W Installation Instructions 27 Installation Instructions 1 Safety instructions Warning!The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc. ) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. [. . . ] In the event of legally admitted liability, compensation will not exceed the purchase price paid for the appliance. These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user must first make sure that they satisfy the technical conditions (e. g. : voltage, frequency, installation instructions, type of gas, etc. ) for the country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium. [. . . ]