User manual AEG-ELECTROLUX FP4400

[. . . ] Overload cut-out reset button ** (underside of appliance) Insert holder Plastic blade Metal blade with blade protector Whisking disk Citrus press Safety cover for mixer drive Dough scraper 1 With the warning triangle and/or by means of key words (Danger!), information is emphasized which is important for your safety or the correct functioning of the appliance. it is essential that this information is observed. 0 This symbol guides you step by step through the operating procedure for your appliance. [. . . ] If the appliance has cooled down sufficiently, the button will engage (fig. If it jumps back out, allow the appliance to cool down a little longer, then repeat the process. Once the reset button has engaged, put the appliance back to its normal working position (fig. Plug the power lead back into the mains socket (fig. 18/➂ and ➃), as described at the relevant point in these operating instructions. The appliance is now ready for use again. Turn the speed selector to the right to the required position (fig. 18/➄) and continue with the function that was interrupted. 1/B and 2) on the mixer drive (mark on mark ) and turn counter-clockwise to the stop. The mix container is heard to engage (mark on mark ). 1/C and 3) on mix container and turn until the nose of the cover is directly above the handle. 0 Place safety cover on mixer drive (mark on mark ) and turn counterclockwise to the stop. The safety cover is heard to engage (mark on mark ). The insert holder must be fitted with the appropriate insert depending on the purpose of application (see "Inserting cutting insert in insert holder"). 8) mesh with the teeth underneath on the spindle. 3 3 Preferably hold the insert holder with two fingers in the two handle holes. 1/F) on the all-purpose bowl (mark on mark ) and turn counter-clockwise to the stop. The nose of the cover is then directly above the handle (mark on mark ). 10) The appropriate insert must be placed in the insert holder depending on use. 1 3 1 0 0 0 The inserts are contained in the hinged accessories compartment (fig. They should be held only with the handle!Take required insert by the handle from the accessories compartment (fig. [. . . ] Mixer Container and blade can be cleaned easily and properly with the aid of the pulse position. 0 Fill the mix container half full with warm (not hot!0 Then rinse the container under running water. 3 Inserts 0 Clean inserts with brush or cloth under running water or in a dishwasher! [. . . ]