User manual AEG-ELECTROLUX GA55IEEV

[. . . ] Support pour verres Pour les verres à pied long et les verres hauts, rabattez le support pour verres vers le haut (fig. Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 75 76 77 79 80 80 81 82 85 86 Setting and starting a washing programme 87 Washing programmes 88 Care and cleaning 90 What to do if. For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. [. . . ] Put service dishes in the front part of the basket. The rows of prongs in the rear part of the basket can be flat to load pots, pans, bowls and deep dishes. Hold the two rows of prongs on the left side at the rear part of the basket. Mix spoons with other cutlery to prevent them to bond together. Lower the handle of the cutlery basket to put the cutlery in the basket. You can adjust the width of the left row of prongs. Pull the row of prongs until it disengages. Push the row of prongs out of the guide. Put the row of prongs into the other guide. Push the row of prongs down until it engages in position. Put forks and spoons with the handles down. If the dimensions of the cutlery prevent use of the cutlery grids, you can easily hide them. You can use these parts separately for more loading flexibility. To disassemble the parts, move them horizontally in opposite directions and pull them apart. To assemble the parts, put them together and move horizontally to each other. Glass holder For glasses with long stems and longer glasses, fold the glass holder up (fig. If you do not use the glass holder, put it to the right side (fig. Adjustable cup racks For longer items, fold the cup racks up. You can set the cup racks in a medium position. Put or hang the glasses with the stems into the slots in the cup racks. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to the upper position. Do these steps to move the upper basket to the upper or lower position: 1. [. . . ] Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Do not connect the appliance to new pipes or pipes that are not used for a long time. Let the water run for some minutes, then connect the inlet hose. If there is a leak in the water inlet hose, the safety valve interrupts the running water. [. . . ]