User manual AEG-ELECTROLUX GA60GLI221

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] The dishwasher salt keeps the water softener clean and in good conditions. refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. Press and hold buttons (8) and (9) at the same time until the programme indicators above buttons (8), (9) and (10) flash. The programme indicator above button (10) continues to flash. â· The display shows the setting of the = level water softener. Press button (10) again and again to change the setting. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. Make sure that the release button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). Set and start the correct programme for the type of load and soil. â· Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. â· Do not put in the appliance items that can absorb water (sponges, household cloths). [. . . ] The appliance goes back to setting mode, you have to set the programme again. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. [. . . ]