User manual AEG-ELECTROLUX GA60GLV220

[. . . ] Before the installation and use, read this manual carefully: · For your safety and the safety of your property. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage. Children and vulnerable persons safety · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. [. . . ] refer to 'Select and start a washing programme'. Acoustic signals You can hear the acoustic signals in these conditions: · To activate the acoustic signals again, do steps (1) through (7). Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. The display shows the setting of the and you water softener (example: hear five acoustic signals = level 5). Press button (3) again and again to change the setting. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. It is correct that water comes out from the salt container when you fill it with salt. Press the lid until it locks into position. Use long washing programmes when you use the detergent tablets. These cannot fully dissolve with short washing programmes and can decrease the washing results. [. . . ] With some malfunctions, the display shows an alarm code: · - The appliance does not fill with water Malfunction The appliance does not fill with water. When the countdown is completed, the washing programme starts automatically. Possible cause The washing programme was not applicable for the type of load and soil. You did not put the items correctly in the baskets, water did not touch all surfaces. [. . . ]