User manual AEG-ELECTROLUX GA60SLV221

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Make sure that the salt container and the rinse aid dispenser are full. Start the shortest programme with a rinsing phase, without detergent and without dishes. Press one of the menu buttons to set a different language and then press OK /Start to confirm. Make sure that the current setting of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Do not use detergent and do not load the baskets. if you use the combi detergent tablets , activate the multitab function. These tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. The dishwasher salt keeps the water softener clean and in good conditions. refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. When it is necessary to fill the salt container, the display shows the message REFILL SALT . Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. [. . . ] Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). [. . . ]