User manual AEG-ELECTROLUX GS60AI220

[. . . ] Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] ⷠFill the detergent dispenser only before you start a washing programme. It comes on when the washing phase or the rinsing phases operate. It comes on when the drying phase operates. It comes on in these conditions: · When you adjust the level of the water softener. It comes on when it is necessary to fill the salt container. After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. It comes on when it is necessary to fill the rinse aid dispenser. 1) 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. Use this button to delay the start of the washing programme with an interval of 3 hours. Use this button for these operations: · Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Turn the programme knob clockwise until the programme marker is aligned with the first washing programme. Release the start/cancel button when the on/off indicator and the start/cancel indicator start to flash. The number of flashes shows the setting of the water softener (example: 5 flashes / pause / 5 flashes = level 5). [. . . ] The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values. Starting the washing programme without delay start Starting the washing programme with delay start When the countdown is completed, the washing programme starts automatically. When you close the door, the countdown continues from the point of interruption. If the delay start has not started, you can change the selection. [. . . ]