User manual AEG-ELECTROLUX GS60AV220

[. . . ] Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] It comes on in these conditions: · When you adjust the level of the water softener. It comes on when it is necessary to fill the rinse aid dispenser. It comes on when it is necessary to fill the salt container. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt container is empty, the related indicator does not come on while a washing programme operates. These indicators have also an auxiliary function when you: · With this button you can: · Use this button to delay the start of the washing programme with an interval of 3 hours. The appliance must be in setting mode for these operations: · Only one programme indicator comes on. ­ It is necessary to cancel the programme to go back to the setting mode. You can hear the acoustic signals in these conditions: · Press and hold the programme button until the programme indicator (A) flashes and the programme indicator (B) comes on. The programme indicator (A) comes on and the programme indicator (B) starts to flash. After some seconds, the programme indicator (A) goes off and the end indicator comes on. Press the programme button again, the end indicator goes off. To activate the acoustic signals again, do steps (1) through (4). Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. [. . . ] 2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values. Starting the washing programme without delay start To set a washing programme, press the programme button again and again until the related programme indicator comes on. [. . . ]