User manual AEG-ELECTROLUX GS60BF220

[. . . ] Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Press and hold function button (B) and function button (C) at the same time until the programme indicators above function buttons (A), (B) and (C) flash. The programme indicator above function button (A) continues to flash. Press function button (A) again and again to change the setting. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. It is correct that water comes out from the salt container when you fill it with salt. To help the environment, do not use more than the correct quantity of detergent. obey the instructions on the detergent packaging. If the washing programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use the detergent tablets, put the tablet in the detergent dispenser 1 . Press the lid until it locks into position. These cannot fully dissolve with short washing programmes and can decrease the washing results. Rinse aid makes it possible to dry the dishes without streaks and stains. the rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser: 1. [. . . ] Fill the rinse aid dispenser with rinse aid. Press and hold function button (B) and function button (C) at the same time until the programme indicators above function buttons (A), (B), and (C) start to flash. The programme indicator above function button (B) continues to flash. If the hot water comes from alternative sources of energy, (e. [. . . ]