User manual AEG-ELECTROLUX GS60GI220

[. . . ] Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] The pump works at a very low speed to decrease the level of noise. Because of the low speed, the programme time is long. Set this washing programme in times when the power rate is more economical. Press one of these buttons again and again until the indicator of the washing programme comes on. With these buttons you can: · The appliance must be in setting mode for these operations: · ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. Be sure that the set level of the water softener agrees with the water hardness in your area. Fill the salt container with dishwasher salt. Fill the rinse aid dispenser with rinse aid. Load cutlery and dishes into the appliance. Set the correct washing programme for the type of load and soil. Fill the detergent dispenser with the correct quantity of detergent. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Press and hold function button (B) and function button (C) at the same time until the programme indicators above function buttons (A), (B) and (C) flash. The programme indicator above function button (A) continues to flash. Press function button (A) again and again to change the setting. Use of dishwasher salt If the water softener is set electronically to the level 1, the salt indicator stays off. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. [. . . ] When the countdown is completed, the washing programme starts automatically. Possible cause The washing programme was not applicable for the type of load and soil. You did not put the items correctly in the baskets, water did not touch all surfaces. incorrect position of the items in the baskets. [. . . ]