User manual AEG-ELECTROLUX GTN1500

[. . . ] € When the steam function is used there can be some hot water dripping from the brewing head. The water is hot, there is a risk for scalding. € When opening the steam valve there is a shot of hot water coming out. Be careful and open the steam valve slowly. [. . . ] The machine must not be used with empty tank!If you use it without water for a too long time the auto priming could be blocked. To prime the circuit, place a bowl under the hot water pipe and turn the knob to the steam/hot water position. When a steady flow comes out from the pipe, turn the knob back. When starting the machine for the first time: Place a bowl under the steam/hot water pipe and turn the knob to the steam/hot water position. Run ½ of the container and turn the knob back. Only suitable Lavazza “A MODO MIO” capsules should be placed in the capsule compartment. Single dose capsules brew a single coffee/product. Inserting 2 or more capsules can cause the machine to malfunction. Adjust the coffee spout height for different cup sizes by either pulling it down or pushing it up. The machine is equipped with an energy saving function that automatically switches it off after 30 min of inactivity. For an easier cleaning, the pipe can also be removed. We recommend to decalcify the machine regularly depending on the water hardness (2–3 months). We recommend to use Electrolux decalcifying solution EPD4/C/D/E/N/R (never use vinegar). Fill the water tank with decalcifying solution (follow product instructions). , then turn the knob to steam/hot water position (steam led and coffee led will flash alternately during the 30 minute decalcifying process). When the decalcifying process is finished, steam led will flash fast in order to remind the user to turn the knob back. Rinse the water tank properly, fill it with fresh water and put it back. Open the knob and rinse machine until the tank is empty. Causes The machine is not connected to the power source. Solutions Connect the machine to the power source. The loading lever doesn’t reach the brewing position. [. . . ] EN Disposal Packaging materials The packaging materials are environ­ mentally friendly and can be recycled. The plastic components are identified by markings, e. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ]