User manual AEG-ELECTROLUX GWH275EGN

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. Com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] €“ be careful when you remove or install the accessories. €¢ Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of the warranty law. €¢ Use a deep pan for moist cakes. Risk of injury, fire or damage to the appliance. €¢ Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break. €¢ Replace immediately the door glass panels when they are damaged. €¢ Be careful when you remove the door from the appliance. €¢ Clean regularly the appliance to prevent the deterioration of the surface material. The top and bottom heating elements operate at the same time. To roast or roast and bake food with the same cooking temperature, on more than one shelf, without flavour transference. To grill flat food items in small quantities in the middle of the shelf. To grill flat food items in large quantities. The grill and bottom element provide direct heat and the fan circulates the hot air to cook the pizza toppings or pie filling. Turn the knob for the timer as far as it goes, then turn it to necessary time period. After the time period is completed, an acoustic signal sounds. : Turn the knob for Normal setting the timer to . In this position you operate the appliance manually. 1 Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan continues to operate until the temperature in the appliance cools down. [. . . ] Turn the two fasteners by 90° and remove them from their seats. Carefully lift (step 1) and remove (step 2) the glass panel. Clean the glass panel with water and soap. 1 2 Installing the door and the glass panel When the cleaning is completed, install the glass panel and the oven door. [. . . ]