User manual AEG-ELECTROLUX GXS09HT2WE

[. . . ] [. . . ] Drill one (1) hole ( 85mm for 7, 000, 9, 000, 12, 000Btu/h models or 115mm for 18, 000, 21, 000, 24, 000 and 30, 000Btu/h models) slanting slightly to outdoor side. Outdoor 5-7mm Flare nut Copper tube Connection of pipes - Indoor Tubing retainer 9 Tape the tubing, drain hose and the connecting cable. Be sure that the drain hose is located at the lowest side of the bundle. Locating at the upper side can cause drain pan to overflow inside the unit. Insert the piping, drain hose and the connecting cable into the piping hole. Tubing retainer Piping for passage through piping hole Connection cable Drain hose (7, 000Btu/h, 9, 000Btu/h and 12, 000Btu/h Cooling Only Models) (7, 000Btu/h, 9, 000Btu/h and 12, 000Btu/h Reverse Cycle Models) (18, 000Btu/h and 21, 000Btu/h models) (24, 000Btu/h and 30, 000Btu/h models) For 18, 000Btu/h, 21, 000Btu/h, 24, 000Btu/h and 30, 000Btu/h models, a power cord should be installed according to the diagram above. CHECKING THE DRAINAGE AND FORMING THE PIPING Air Tip of drain hose dipped in water Less than 50mm gap Charge hose Pipe Length (L) <5m 5~10m Air Purge Method Use Vacuum Pump Use Vacuum Pump Time required (min) 25 30 Pressure gauge Open Close Vacuum pump 20 Connection pipe D Outside ambient TEMP. [. . . ] [. . . ]