User manual AEG-ELECTROLUX HC451220EB

[. . . ] FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. [. . . ] Put the connection bar in the worktop cut out and push up half of the width against the appliance. Loosely turn in fixing plates from below on the worktop and on the connection bar. Put the subsequent appliance in the worktop cut out . Make sure that the front ends of the appliances are on the same level. Put the silicon into the space between the appliances. Press the rubber shape with some strength against the glass ceramic and move it slowly along the space. Do not touch the silicon until it become hard, it can last about a day. Carefully remove silicon that came out with a shaving blade. Display The cooking zone is off The cooking zone operates Keep Warm / function is on The automatic heat-up function is on Power function is on + digit / / There is a malfunction OptiHeat Control (3 step Residual heat indicator): still cooking / keep warm / residual heat Lock/Child safety function is on Cookware unsuitable or too small or no cookware on the cooking zone The automatic switch off is on Description OptiHeat Control (3 step Residual heat indicator) The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. Touch for 1 second to start or stop the appliance. You do not set the heat setting after you start the hob. ⷠYou cover a sensor field with an object (a pan, a cloth, etc. The sound operates until you remove the object. Before you use the hob again, the cooking zone must be cool. Comes on and after 2 minutes the cooking zone stops automatically. ⷠYou do not stop a cooking zone or change the heat setting. After some time comes on and the hob stops. Automatic Switch Off times Heat setting Stops after 6 hours 5 hours 4 hours 1. Touch the control bar at the heat setting. change to the left or the right , if it is necessary. Do not release before you have a correct heat setting. Automatic heat up function sets the highest heat setting (not ) for some time, and then decreases to the necessary level. [. . . ] The bottom of the cookware must be as thick and flat as possible. If you can hear · Cracking noise: cookware is made of different materials (Sandwich construction). ⷠWhistling: you use one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction). ⷠHumming: you use high power levels. [. . . ]