User manual AEG-ELECTROLUX HK634070IB

[. . . ] HK634070IB User manual Ceramic glass hob 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] 600mm 490+1mm 560+1mm 514+1mm 584+1mm min. 30 mm Description of the appliance Cooking surface layout 1 mm 2 170 mm 265 mm 145 5 175 120/ /210 mm 145 mm 3 1 2 3 4 5 Single cooking zone 1200 W Oval zone 1500/2400 W Single cooking zone 1200 W Control panel Triple cooking zone 800/1600/2300 W 4 6 Description of the appliance Control panel layout 1 2 3 4 5 6 7 11 10 9 8 Use the sensor fields to operate the appliance. sensor field 1 2 3 4 5 6 7 8 9 10 11 function starts and stops the hob locks/unlocks the control panel shows the heat setting show for which zone you set the time shows the time in minutes increase or decrease heat setting starts and stops the outer ring increase or decrease the time selects the cooking zone starts and stops the outer rings starts and stops STOP+GO with an indicator a heat setting display cooking zones' indicators of timer the timer display / with an indicator / with an indicator Heat setting displays Displays and sounds tell which functions operate Display The cooking zone is off The cooking zone operates Keep Warm / function is on Description The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Operating the appliance 7 Residual heat indicator WARNING!Risk of burns from residual heat! Operating the appliance On and Off Touch for 2 seconds to start the appliance. Touch for 1 second to stop the appliance. Automatic Switch Off The function stops the hob automatically and comes on if: · all cooking zones are off . · you do not set the heat setting after you start the hob. · you cover a sensor field with an object (a pan, a cloth, etc. ) for longer than 10 seconds. The sound operates some time and the hob stops. Remove the object or clean the control panel. · you do not stop a cooking zone or change the heat setting after some time. Automatic Switch Off times Heat setting Stops after , 5 hours 4 hours 1. 5 hours 6 hours The heat setting Touch to increase the heat setting. Touch and at the same time to switch off the cooking zone. / Switching the outer rings on and off You can match the effective heating surface to the size of the cookware. For To switch on the outer ring touch the sensor field / more outer rings touch the same sensor field again. Do the procedure again to switch off the outer ring. The indicator goes out. 8 Operating the appliance The automatic heat up function The automatic heat up function starts when you set a heat setting starting from . A cooking zone operates with the maximum power for some time and than automatically switches back to the heat setting you set. If you set a higher heat setting during the automatic heat up (for example from to ), the automatic heat up is adjusted. If there is still residual heat on the cooking zone (display ), the automatic warm up does not start. The time of the automatic warm up changes for different heat settings: 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 Using the Timer Use the timer to set how long the cooking zone operates for one cooking session. Set the timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. · Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. · Starting or changing the timer: touch or of the timer to set the time ( 00 99 minutes). [. . . ] See the section "Starting the STOP+GO". · Start the appliance again and set the heat setting in 10 seconds. The residual heat indicator does The cooking zone is not hot because it operated only for a short not come on. If the cooking zone must be hot, speak to the after sales service. You cannot switch on the outer Switch on the inner ring first. [. . . ]