User manual AEG-ELECTROLUX HK653322FB

[. . . ] Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. [. . . ] OptiHeat Control shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. Touch for 1 second to activate or deactivate the appliance. You do not set the heat setting after you activate the appliance. ⷠYou spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. The sound operates some time and the appliance deactivates. Before you use the hob again, the cooking zone must be cool. ⷠYou use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. ⷠYou do not deactivate a cooking zone or change the heat setting. ⷠTo set the cooking zone (if more than 1 cooking zone operate): touch again and again until the indicator of a necessary cooking zone comes on. ⷠTo activate the CountUp Timer: touch of the timer comes on. When the indicator of the cooking zone starts to flash slow, the time counts up. To see how long the cooking zone operates: set the cooking zone with . To deactivate the CountUp Timer: set the cooking zone with and touch or to deactivate the timer. the indicator of the cooking zone goes out. Minute Minder You can use the timer as a Minute Minder while the cooking zones do not operate. When the time comes to an end, the sound operates and 00 flashes. Operates, you cannot change the heat setting. When function does not stop the timer function. the · To activate this function touch . [. . . ] If not, the dirt can cause damage to the appliance. Put the scraper on the glass surface at an acute angle and move the blade on the surface . ­ Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel. [. . . ]