User manual AEG-ELECTROLUX HK764401PB

[. . . ] FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you'll find everything you need to keep all your AEG appliances looking spotless and working perfectly. [. . . ] Touch for 1 second to activate or deactivate the appliance. You do not set the heat setting after you activate the appliance. ⷠYou spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. The sound operates some time and the appliance deactivates. Before you use the hob again, the cooking zone must be cool. ⷠYou use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. ⷠYou do not deactivate a cooking zone or change the heat setting. After some time, comes on and the appliance deactivates. Heat setting The cooking zone deactivates after 6 hours 5 hours 4 hours 1. Touch the control bar at the heat setting. change up or down , if it is necessary. Do not release before you have a correct heat setting. You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting. to start the Automatic Heat Up function for a cooking zone: 1. Immediately touch the necessary heat setting. After 3 seconds comes on in the display. After that the induction cooking zone automatically switches back to heat setting 14. Switch off, touch a heat setting - The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. Automatically decreases the power in the second cooking zone to a lower level. [. . . ] The noises are normal and do not refer to appliance malfunction. Put cookware on a cooking zone before you start it. To save the energy, the heater of the cooking zone deactivates before the count down timer signal. The difference in the operation time is depends of the heat setting level and the time you cook. [. . . ]