User manual AEG-ELECTROLUX HK834060XB

[. . . ] HK834060XB User manual Ceramic glass hob 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] 50 mm = R 5mm 490+1mm = 600mm 750+1mm min. 30 mm If you use a protection box (additional accessory), the protective floor directly below the appliance is not necessary. 6 Product description Product description Cooking surface layout 1 2 145 mm 265 mm 170 mm 120/210 mm 145 mm 3 1 2 3 4 5 Single cooking zone 1200 W Oval cooking zone 1500/2400 W Single cooking zone 1200 W Control panel Double cooking zone 750/2200 W 5 4 Control panel layout 1 2 3 4 5 6 7 11 10 9 8 Use the sensor fields to operate the appliance. Displays indicators and sounds tell which functions operate. sensor field 1 2 3 4 5 6 7 8 9 10 function starts and stops the hob locks/unlocks the control panel a heat setting display cooking zones' indicators of timer the timer display / / shows the heat setting shows for which zone you set the time shows the time in minutes increase or decrease heat setting starts and stops the outer ring increase or decrease the time selects the cooking zone starts and stops the outer ring Operating instructions sensor field 11 7 function starts and stops the STOP+GO function Heat setting displays Display The cooking zone is off The cooking zone operates Keep Warm / function is on Description The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Residual heat indicator WARNING!Risk of burns from residual heat! Operating instructions On and Off Touch for 2 seconds to start the appliance. Touch for 1 second to stop the appliance. Automatic Switch Off The function stops the hob automatically if: · all cooking zones are off . · you do not set the heat setting after you start the hob. · you cover a sensor field with an object (a pan, a cloth, etc. ) for longer than 10 seconds. The sound operates some time and the hob stops. Remove the object or clean the control panel. · you do not stop a cooking zone or change the heat setting. After some time comes on and the hob stops. Automatic Switch Off times Heat setting Stops after 6 hours 5 hours 4 hours 1. 5 hours The heat setting Touch to increase the heat setting. Touch and at the same time to switch off the cooking zone. 8 Operating instructions / Switching the outer rings on and off You can match the effective heating surface to the size of the cookware. For To switch on the outer ring touch the sensor field / more outer rings touch the same sensor field again. Do the procedure again to switch off the outer ring. The indicator goes out. Automatic Heat Up You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function the cooking zone must be cold (no in the display). Touch of the cooking zone again and again until the necessary heat setting comes on. After 3 seconds comes on in the display. To stop the function touch . 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 Starting the STOP+GO The function sets all cooking zones that operate to a keep warm setting. The heat setting that you set before comes on. [. . . ] See the section "Locking/unlocking the control panel" and "Child safety device". · The STOP+GO function operates . See the section "Starting the STOP+GO". · Start the appliance again and set the heat setting in 10 seconds. The residual heat indicator does The cooking zone is not hot because it operated only for a short not come on. [. . . ]