User manual AEG-ELECTROLUX JB125SL

[. . . ] Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. aeg. com Register your product for better service: www. aeg. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. aeg. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. ENGLISH 3 1. SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. [. . . ] Set default temperature: • -18°C for the freezer The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. 2. 5 FROSTMATIC function To switch on the function: 1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. ENGLISH 7 3. The Minute Minder indicator goes off. It is possible to change the time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. 2. 7 Child Lock function To lock the buttons from unintentional operation select the Child Lock function. Press the Mode button until the corresponding icon appears. Press the Mode button until the Child Lock indicator flashes. The Child Lock indicator goes off. earlier power failure or door is open) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. The freezer temperature indicator shows the highest temperature reached for a few seconds. The alarm indicator continue to flash until the normal conditions are restored. 2. 9 Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odor. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. Take care of not to damage the cooling system. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Many proprietary kitchen surface cleaners contain chemicals that can attack/ damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. 5. 3 Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. 5. 4 Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. [. . . ] Ensure that it is disposed of safely. 7. 4 Removing the transport support Your appliance is equipped with transport support to secure the door during transportation. To remove them do these steps: • Open the door. • Remove the transport support from the door sides. Some models are fitted with a silencing pad under the cabinet. [. . . ]