User manual AEG-ELECTROLUX JT1200

[. . . ] The crockery warmer should only be built-in in combination with those appliances indicated by the manufacturer. If it is fitted in combination with other appliances, the guarantee is no longer valid since it is impossible to guarantee that the crockery warmer will work correctly. Installation To build-in the crockery warmer in combination with another appliance there must be a fixed, interim shelf in the housing unit to support the weight of both appliances. The appliance to be combined with the crockery warmer will be placed directly on the latter without any need to have a separating shelf. [. . . ] Conducting parts or changes to electrical or mechanical components may represent a Warning!Repairs and maintenance, especially of parts carrying electrical current, must only be done by technicians authorised by the manufacturer. The manufacturer and retailers do not accept responsibility for any damage caused to people, animals or property as a result of repairs and maintenance carried out by non-authorised personnel. Repairs undertaken during the guarantee period must only be done by technicians authorised by the manufacturer. If this is not the case then any damage resulting from the repair in question is excluded from the guarantee. The appliance must be disconnected from the electrical current when installation and repair work is being done. To disconnect the appliance from the current, one of the following conditions must apply: The switchboard fuses / circuit breakers must be disconnected. The plug should be removed from the socket. To remove the plug from the socket do not pull on the electric cable but rather pull out the plug itself directly. 7 Safety instructions Precautions during use This appliance complies with current safety standards. Improper use of the appliance may put the user at risk. Appliance description 8 APPLIANCE DESCRIPTION Main Components 1 2 3 Function selector On/Off switch Control Lamp 4 5 6 Handle Anti-Slip mat Drawer Grid * KD91404E KD91403E / JT1200 6 *Drawer Grid only available with the model JT1200 How the crockery warmer works This appliance is equipped with a warm air circulation system. A fan distributes the heat generated by an electrical heating element throughout the interior of the appliance. The thermostat allows the user to define and control the temperature wanted for the crockery. The circulating hot air that is generated heats up the crockery quickly and evenly. A metal grille protects both the heating element and the fan. The base of the drawer is fitted with a non-slip mat to prevent plates and dishes sliding around when the drawer is opened and closed. 9 Use USE Before using for the first time Before using the appliance for the first time you should clean the interior and the Then heat the crockery warmer for at least 2 hours. For this, turn the temperature Make sure the kitchen is well-ventilated when you are doing this. Both the odour and any smoke that may form will disappear after a short time and neither signifies that there is anything wrong with the connection or the appliance. control Panel The control panel has a function and the on/off switch. The control panel is only visible when the drawer is open. [. . . ] If you wish to keep the cooked meat warm, put the setting back to 60° C. We recommend not to use the warming function for more than 1hr. Load Capacity 12 LOAD CAPACITY Load capacity depends on the size of the crockery items: KD 91403 E / KD 91404 E 6 persons servings 6 x 24cm Dinner Plates 6 x 10cm Soup Bowls 1 x 19cm Serving Dish 1 x 17cm Serving Dish 1 x 32cm Meat Plates or 20 dishes with or 80 espresso coffee cups or 40 tea cups or … 28 cm KD 92903 E 12 persons servings 12 x 24cm Dinner Plates 12 x 10cm Soup Bowls 1 x 19cm Serving Dish 1 x 17cm Serving Dish 2 x 32cm Meat Plates or 40 dishes with or 160 espresso coffee cups or 80 tea cups or … 28 cm 13 Cleaning and maintenance CLEANING AND MAINTENANCE Cleaning is the only maintenance action that is required normally. Cleaning must be done with the crockery warmer disconnected from the electrical power supply. [. . . ]