User manual AEG-ELECTROLUX KAM 200 AUTOMATIC

[. . . ] Never let the mains lead touch the warming plate when it is hot! ⷠNever pull the plug from the socket by means of the mains lead! ⷠDo not use the appliance if: ­ the mains lead is damaged, ­ the housing shows visible signs of damage. ⷠThe warming plate and coffee jug become hot during operation due to the nature of their function. [. . . ] At the start time, the green indicator (Figure 2/F) will go out and the red indicator next to the button (Figure 2/B) will be illuminated. Coffee using the coffee grinder You can prepare coffee with beans either immediately (, , Normal mode"), or by pre-programming the start time (, , Auto" function. For preparing coffee with beans you must set number of cups, coffee strength and where required the aroma setting. Number of cups Button 2-10 (Figure 2/G) is for setting how many cups are to be prepared. the grinder will grind the appropriate amount of coffee beans. The number of cups is indicated next to the symbol . Coffee strength Button (Figure 2/D) is for setting the coffee strength. The symbols for coffee strength have the following significance: weak coffee medium coffee strong coffee Aroma setting The aroma setting guarantees full coffee enjoyment even with small quantities (2-4 cups). if the aroma setting is selected , the symbol lights. The aroma setting can only be selected, if or cups are set with the button 2-10 (Figure 2/G). If more than 4 cups are set, the aroma setting cannot be selected. 0 Pressing the button 2-4 again changes between the number of cups and , the aroma setting remains on. 0 To cancel the aroma setting, press button 2-10 (Figure 2/G), the symbol will go out and the number of cups lights. 2 Preparing coffee using the coffee grinder with pre-programming of the start time (, , Auto" function) 0 Swing out the water supply (Figure 1/D) using the swivel lever (Figure 1/H) until it engages (Figure 13). programming the , , Auto"function: 0 Press button PROG (Figure 2/K). The green lamp next to the button AUTO (Figure 2/F) flashes. The following settings must be made whilst the green lamp is flashing. Swing out the water supply (Figure 1/D) using the swivel lever (Figure 1/H) until it engages (Figure 13). Set the desired number of cups with the button 2-10 (Figure 2/G). Set the desired coffee strength with the button (Figure 2/D). : 4 cups: medium strength, with aroma setting ­ the display shows: Once the coffee has been ground, the water supply swings back automatically to the brewing position and brewing begins. If the green lamp has already ceased to flash before the settings are completed, press button AUTO (Figure 2/F) again and continue with the programming. [. . . ] insert a paper filter in the swivel filter. Brush the coffee residue (including that from the rear of the channel) into the paper filter using a suitable item (e. The coffee residue can also be removed using a vacuum cleaner. Then wipe the grinding channel with a dry cloth. [. . . ]